,,Mags Sticker for Honda Click 125i (Set: Harap at Likod 4 Sides)

Mags Stickers for Motorcycle. Sold as Set. for Front and Rear (Side by Side).
Available in: Non-Reflective 3M Reflective Chrome (Metallic)
Please chat us for more information about the Product.

Sticker Installation Instructions:

Clean the Surface: Before sticking the sticker, ensure that the surface is clean, dry, and free from dust, dirt, grease, or any other contaminants. Use a mild detergent or cleaning solution along with a soft cloth to clean the area thoroughly. Allow it to dry completely before proceeding to the next step.

Positioning and Alignment: Carefully decide on the location where you want to place the sticker. Gently place the sticker on the surface without fully sticking it. This will allow you to adjust the position and alignment to ensure it is centered and correctly placed.

Peel Off the Backing: Once you have determined the correct position, start peeling off the backing paper from the sticker. Be cautious not to touch the adhesive side with your fingers to avoid transferring oils or dirt onto the sticker.

Apply the Sticker: Gradually lower the sticker onto the cleaned surface, aligning it with the desired position. As you stick it down, start from one edge and press firmly across the entire sticker surface, moving outward to avoid trapping air bubbles.

Smooth Out Air Bubbles: If any air bubbles form during the application, gently push them towards the edges of the sticker using a soft cloth or squeegee. Smooth out the sticker to ensure a seamless finish.

Final Check and Press: Once the sticker is fully applied, carefully inspect the edges and surface for any remaining bubbles or imperfections. Press down firmly on the sticker one more time to ensure a strong adhesion.

Allow Time to Set: After sticking the sticker, it's essential to allow it some time to set and adhere properly. Avoid exposing the sticker to excessive heat, water, or heavy handling for at least 24 hours to ensure optimal bonding.

Important Tips:

Avoid sticking stickers on recently painted surfaces or surfaces with loose paint, as it may damage the paint when removed. For best results, apply stickers in moderate temperatures, not in extreme heat or cold. Always follow any specific instructions provided by the sticker manufacturer. If the sticker is large, it may be helpful to have someone assist you during the installation process. When removing stickers, do it gently to avoid damaging the surface. You can use a heat source (like a hairdryer) to soften the adhesive and make removal easier. By following these instructions, you can ensure a successful and long-lasting sticker installation that adds a personal touch to your favorite items or vehicles.

Welcome to our store, we are happy to serve you.
notes:
Our shop ships from Manila, Manila 2-3 days, Luzon 3-5 days, other islands (including Mindanao) 6-10 days, if you don't have enough time to wait, please don't order, please shop in advance!
If you like this product, please share what you w